An alternative way to power your electronic devices that uses a 9V battery! This 9V Battery
Eliminator Kit is used to replace a real 9V battery in electronic devices that uses a 9V battery. Perfect
for use in electronic devices that are heavily used or left on for
extended periods of time. This 9V Battery Eliminator Kit includes a 9V Active Dummy Cell Battery and
an AC to DC Wall Power Adapter. Both of these components easily and
neatly plug into each other for a complete "plug-and-play" battery
eliminator solution! Stop
changing out dead batteries and start saving money! Stop worrying
about whether your electronic device is turned off!
The 9V Active Dummy Cell Battery included in this kit is the same size as a regular 9V battery, so it easily fits into the electronic device's battery compartment space. Just make sure you observe the correct polarity just as you would when inserting a real battery. The thin flat cable coming out of the 9V Active Dummy Cell Battery can easily be run around the side of most battery compartment covers, so the original battery compartment cover can still be used. In some cases, it might be necessary to take a small file and file out a shallow groove in the battery compartment cover to give the thin flat cable a little bit more room to run around the side of the cover.
The AC to DC Wall Power Adapter included in this kit is designed for use with the included 9V Active Dummy Cell Battery. The AC to DC Wall Power Adapter plugs into a standard wall outlet and coverts the 120VAC coming from the wall outlet into 9VDC which is the voltage required to power electronic devices that use a single 9V battery. Since this AC to DC Wall Power Adapter can supply up to 2A of output current, it can power any electronic device on the market that uses a single 9V battery.
The 9V Active Dummy Cell Battery and AC to DC Wall Power Adapter cables can easily be hidden behind furniture, plants and under table cloths, rugs, decorative snow, etc.
Don't forget to check out our Battery Eliminator Accessories such as Power Extension Cables, Power Splitter Cables, additional Active and Passive Dummy Cell Batteries, and Slim-Line AC to DC Wall Power Adapters for use in tight spaces and power strips.
NOTE: The 9V Active Dummy Cell Battery is not a real battery and will not power an electronic device on its own. It needs to be used in conjunction with the included AC to DC Wall Power Adapter as discussed above and depicted in the included diagram.
WARNING(S): Do not attempt to charge the 9V Active Dummy Cell Battery with a battery charger. Doing so may damage the battery charger.
IF YOU HAVE ANY QUESTIONS OR NEED TECHNICAL SUPPORT TO DETERMINE WHICH BATTERY ELIMINATOR KIT, REPLACEMENT PARTS OR ACCESSORIES YOU NEED, PLEASE DON'T HESITATE TO CALL OR E-MAIL US AT email@example.com.
· Can Be Used to Eliminate a 9V Battery in Electronic Devices That Use a Single 9V Battery
· Easy to Use "Plug-and-Play" Kit
· Stop Changing Out Dead Batteries and Start Saving Money!
· Perfect For Electronic Devices That Are Heavily Used and Left on For Extended Periods of Time!
· Kit Includes a 9V Active Dummy Cell Battery and a 120VAC to 9VDC@2A Wall Power Adapter
· Thin Flat Cable Coming Out of Active Dummy Cell Battery Easily Runs Around Battery Compartment Cover and Under Electronic Device Without Causing it to Tilt or Not Sit Flat
· Power Cables Can Easily Be Hidden Behind Furniture & Plants, Under Rugs & Table Cloths, Around Plants & Other Objects, Under Decorative Snow, Etc.
· Works With Our Power Eliminator Accessories Such As Power Extension Cables, Power Splitter Cables, Space Saving Slim-Line AC to DC Wall Power Adapters, Additional Active and Passive Dummy Cell Batteries
· Thin Flat Cable Coming Out of Active Dummy Cell Battery Has 5.5mm x 2.1mm Barrel Socket at End That Mates With Barrel Plug at End of AC-DC Wall Power Adapter Cable
· Perfect For Use With Electronics Devices That Stay in One Place Such as Smoke & Fire Alarms, Carbon Monoxide Detectors, Bedside Radios, Multi-meters, Etc.
Made in China For LightsandBatteries.com
9V Active Dummy Cell Battery
Cable Dimensions (Length x Width x Thickness): 7.87" x 0.20" x 0.00787" (200mm x 5.08mm x 0.2mm)
Cable Type: 24AWG Equivalent Flexible Flat Cable (FFC)
Connector Type: 5.5mm x 2.1mm Barrel Socket
Connector Polarity: (+) Tip/Inner Conductor, (-) Ring/Outer Conductor
Color(s): Black FFC Cable & Blue Dummy Cell Battery Housing
|9V Passive Dummy Cell Battery
AC to DC Wall Power Adapter
|Input Voltage: 100VAC-240VAC @ 50Hz-60Hz
Output Voltage: 9VDC @ 2A
Cable Length and Type: 6-ft (1.8m) and 2AWG Jacketed Round Cable
Output Connector Type: 5.5mm x 2.1mm Barrel Plug
Output Connector Polarity: (+) Tip/Inner Conductor, (-) Ring/Outer Conductor
Construction: Plastic Housing
Location Rating: Indoor Use Only
Certifications: FCC and UL/cUL Listed
Housing Size (Width x Height x Depth): 1.59" x 2.96" x 1.57" (40.48mm x 75.18mm x 39.81mm)
Battery Eliminator Number & Size
Eliminates a Single 9V Battery