Finally! An alternative way to power your flameless LED candles and other electronic devices that use 4 x D batteries! This 4 x D Battery Eliminator Kit (in white) is used to replace real D batteries in flameless LED candles and other electronic devices that uses 4 x D batteries. Perfect for use in electronic devices that are heavily used or left on for extended periods of time. This 4 x D Battery Eliminator Kit includes 1 x D Active Dummy Cell Battery, 3 x D Passive Dummy Cell Battery, and an AC to DC Wall Power Adapter. All of the visible components in this kit are in a special white color
to better blend into white or light colored decors and neatly plug into
each other for a complete "plug-and-play" battery eliminator solution. Stop
changing out dead batteries and start saving money! Stop worrying
about whether your flameless LED candle is turned off or in the timer
The D Active and Dummy Cell Batteries included in this kit are the same size as regular D batteries, so they easily fit into the electronic device's battery compartment spaces. It doesn't matter which space they go into as long as you observe the correct polarities just as you would when inserting real batteries. The thin flat cable coming out of the D Active Dummy Cell Battery can easily be run around the side of most battery compartment covers, so the original battery compartment cover can still be used. In some cases, it might be necessary to take a small file and file out a shallow groove in the battery compartment cover to give the thin flat cable a little bit more room to run around the side of the cover.
The AC to DC Wall Power Adapter included in this kit is designed for use with the included 4 x D Dummy Cell Batteries. The AC to DC Wall Power Adapter plugs into a standard wall outlet and coverts the 120VAC coming from the wall outlet into 6.0VDC which is the voltage required to power electronic devices that use 4 x D batteries. Since this AC to DC Wall Power Adapter can supply up to 1A of output current, it can power any electronic device on the market that uses 4 x D batteries.
The D Active Dummy Cell Battery and AC to DC Wall Power Adapter cables can easily be hidden behind furniture, plants and under table cloths, rugs, decorative snow, etc.
Don't forget to check out our Battery Eliminator Accessories such as Power Extension Cables, Power Splitter Cables, additional Active and Passive Dummy Cell Batteries, and Slim-Line AC to DC Wall Power Adapters for use in tight spaces and power strips.
NOTE: The D Active Dummy Cell Battery and D Passive Dummy Cell Batteries are not real batteries and will not power an electronic device on its own. It needs to be used in conjunction with the included AC to DC Wall Power Adapter as discussed above and depicted in the included diagram.
each regular D battery supplies 1.5VDC, four D batteries will supply 6.0VDC. The included AC to DC Wall Adapter supplies an output voltage of 6.0VDC which is within the acceptable range required by electronic
devices that use 4 x D batteries.
The D Active Dummy Cell Battery is made of an AA Active Dummy Cell
Battery and a
hollow plastic D cell battery dummy case. The AA Active Dummy Cell
Battery simply slides into into the hollow plastic D cell battery dummy
shown in the pictures. The hollow plastic D cell battery dummy case
essentially serves as a AA to D battery size converter, so it will
properly fit in the electronic device's battery compartment.
The D Passive Dummy Cell Batteries are made of AA Passive Dummy Cell
Batteries and hollow plastic D cell battery dummy cases. The AA Passive Dummy Cell
Batteries simply slide into into the hollow plastic D cell battery dummy
shown in the pictures. The hollow plastic D cell battery dummy cases
essentially serve as AA to D battery size converters, so they will
properly fit in the electronic device's battery compartment.
WARNING(S): Do not attempt to charge the D Dummy Cell Batteries with a battery charger. Doing so may damage the battery charger.
IF YOU HAVE ANY QUESTIONS OR NEED TECHNICAL SUPPORT TO DETERMINE WHICH BATTERY ELIMINATOR KIT, REPLACEMENT PARTS OR ACCESSORIES YOU NEED, PLEASE DON'T HESITATE TO CALL OR E-MAIL US AT firstname.lastname@example.org.
· Can Be Used to Eliminate D Batteries in Flameless LED Candles and Other Electronic Devices That Use 4 x D Batteries
· Easy to Use "Plug-and-Play" Kit
· Stop Changing Out Dead Batteries and Start Saving Money!
· Perfect For Flameless LED Candles and Other Electronic Devices That Are Heavily Used and Left on For Extended Periods of Time!
· Kit Includes 1 x D Active Dummy Cell Battery, 3 x D Passive Dummy Cell Batteries, 120VAC to 6.0VDC@1A Wall Power Adapter
· Thin Flat Cable Coming Out of Active Dummy Cell Battery Easily Runs Around Battery Compartment Cover and Under Electronic Device Without Causing it to Tilt or Not Sit Flat
· Power Cables Can Easily Be Hidden Behind Furniture & Plants, Under Rugs & Table Cloths, Around Plants & Other Objects, Under Decorative Snow, Etc.
· Works With Our Power Eliminator Accessories Such As Power Extension Cables, Power Splitter Cables, Space Saving Slim-Line AC to DC Wall Power Adapters, Additional Active and Passive Dummy Cell Batteries
· Thin Flat Cable Coming Out of Active Dummy Cell Battery Has 5.5mm x 2.1mm Barrel Socket at End That Mates With Barrel Plug at End of AC-DC Wall Power Adapter Cable
· 4 x Hollow Plastic D Cell Battery Cases Serve as AA to D Battery Size Converters
· All of the Visible Components in This Kit Are In a Special White Color to Better Blend Into White or Light Colored Backgrounds
Made in China For LightsandBatteries.com
D Active Dummy Cell Battery
Cable Dimensions (Length x Width x Thickness): 7.87" x 0.20" x 0.00787" (200mm x 5.08mm x 0.2mm)
Cable Type: 24AWG Equivalent Flexible Flat Cable (FFC)
Connector Type: 5.5mm x 2.1mm Barrel Socket
Connector Polarity: (+) Tip/Inner Conductor, (-) Ring/Outer Conductor
Blue AA Active Dummy Cell Battery With White FFC Cable Slides Into Black AA to D Size Converter Dummy Cell Battery Case
D Passive Dummy Cell Batteries
Internal Connection: (+) Terminal is Connected to (-) Terminal via Conducting Pin
Blue AA Passive Dummy Cell Battery Slides Into Black AA to D Size Converter Dummy Cell Battery Case
AC to DC Wall Power Adapter
Input Voltage: 110VAC-240VAC @ 50Hz-60Hz
Output Voltage: 6.0VDC @ 1A
Cable Length and Type: 5-ft (1.5m) and 24AWG Zip Wire
Output Connector Type: 5.5mm x 2.1mm Barrel Plug
Output Connector Polarity: (+) Tip/Inner Conductor, (-) Ring/Outer Conductor
Construction: Plastic Housing
Location Rating: Indoor Use Only
Certifications: FCC and UL Listed
Housing Size (Width x Height x Depth): 1.54" x 2.45" x 1.06" (39mm x 62.2mm x 27mm)
Battery Eliminator Number & Size
Eliminates 4 x D Batteries